This is a discussion currently active on OCC Members Facebook group - I thought it would be useful to copy here:
Steve Neal
We're on the lookout for new sails and would like to get opinions from fellow long distance sailors. Our current sails are cross cut dacron and have stretched, resulting in a pot belly and poor upwind performance.
Should we replace our genoa and main with a new set of cross cut sails, or go for tri-radials in a stronger material?
What type of sails do you prefer for long distance cruising?
Our boat is a Hallberg Rassy 43 like the one pictured.
Comments
Guy Chester
I went between cross cut dacron and radial hydrant. Zoom Sails made main and genoa on Nautosphere... very good woven dacron/dynema mix. A year and 10, 000nm or more from Trinidad to Australia they are still like new!
Steve Neal
Guy Chester so these are cross cut Nautosphere? They look great.
Guy Chester
Steve Neal very very happy with them..
Cannot recommend the cloth more highly, only a year old but they have been upwind and down in up to 35kts no issues of distortion, the furling main rubs against the mast slot...no wear or chafe evident..older dacron would "polish"..
David Heath
These folks were good for us. Get a a recommendation for a local sail maker, so that THEY measure the boat and make sure they fit. Crummy sail-makers say they don't fit due to wrong measurements. Good sail-makers make sure they set well, for no extra charge.
http://potomacsails.com/Rene Kesting
Steve , where are you at the moment ?
Steve Neal
Rene Kesting St Augustine USA. How are you liking the ABCs?
Rene Kesting
Steve Neal ABC’s are great ! And glad to have made it here from Panama when we did !
There’s a northsails (fanatsic guy) rep you may want to send a msg ? … See more
Mark Rc Thurlow
I think you may need to help us to help you. Where are you? what is the five year plan? Which countries?
are you a racer, slow and steady, circumnavigating? What does long distance mean?
Steve Neal
slow steady circumnavigating, in the USA currently.... we want reasonable performance, but are looking primarily for longevity without breaking the bank.
Barry Kennedy
Phil and Jamie at zoom did a set of southern ocean sails that I took the Antartica twice , South Georgia and put a total of 40k miles on in 5 years . Unbelievable qualit and service . I had hydranet for the head sail and stay sail. Heavy Dacron with aply on the Leech for the Main. For me I’d go hydranet next time . He also did a cruising code zero that ion 8-9 knots of wind of make 4 knots on a close reach .Phil and Jamie spend tons of time listening to what YOU want. It what he thinks you need . Plus he can ship reasonably to the us and there is no duty . 100% he will make
So my next set of sails
Jayme Okma Lee
We just got sails from Zoom Sails from Jamie Gifford and Behan Gifford. Definely recommend talking to them.
Jan Alexander
Another vote for the Giffords helping you order what suits your needs best from Zoom sails. You can contact them via their blog sailingtotem.com
John Dyer
We went for cross cut Dacron, 7 years ago. Main and jib. In that time we’ve sailed almost 50,000 miles including 1.5 circumnavigation. I would love to go with Hydranet, but it’s twice the price. They still look ok, not perfect but still serviceable. My reckoning was that I could now buy a new set with the money saved. This is on a First 47.7 tall rig. Only 100% Genoa.
Max Shaw
I would definitely recommend contacting Jamie who now works with Zoom Sails. We bought our genoa for our Stevens 47 from him and 36,000nm and seven years later it is doing fine..
Graham Walker
We are just buying new tri-radial Hydranet sails from Zoom Sails. Our previous sails were cross cut Dacron and similarly had stretched and lost shape. We are having them sent to French Polynesia.
Jamie Gifford
Great to see Zoom Sails called out! I'm a sailmaker/designer and circumnavigator and work with Phil Auger (sailmaker/designer and cruiser) for Zoom Sails.
To your questions. Crosscut Dacron has toughness and can hold shape surprisingly well if built with high tenacity Polyester AND enough fiber density in the high load areas. Our last main on Totem was mediocre Dacron (budget reasons) and did 7 years / 45k NM. Then done because of UV degradation, but the shape was still quite good. Downside being that enough fiber density means, heavy and very stiff so bending on the sail is like wrestling an alligator.
Hydra Net and Nautosphere are 2 excellent hybrid Dacron/Dyneema, and woven. No glue bonds to fail with the strength and low stretch benefit of high modulus fibers. Downside is the price.
Happy to talk sails if interested in Zoom or just to give advice.
Barry Kennedy
Jamie spent a lot of time listening and advising even before I bought from him and Phil ,
They been super available and always ready to answer questions or talk shop about fabrics and sails. They have real world experience with what you are going to do with your sails . Not a lot of sailmakers take That kind of time
David McKay
Diomedea has a Spectra laminate main from Norths and a Doyle Stratis load path fabric jib. The jib is an awesome sail. Very powerful. Doing well after 6 years. Only maintenance has been to repaint the paint-on UV strip.
Tom Watters
We bought new sails for our Mason 44 from Quantum Sails in Annapolis before we headed off three years ago. We chose tri radial Hydrant and have been very happy with them. There were a few issues with the headboard and the batten cars, but they all got resolved. I agree that you should have the sailmaker measure.
You may need some maintenance along the way too, for any rubbing spots that wear. We left the jacklines up on one long passage and they chafed through a batten pocket in one spot.
Good luck.
Richard Farrington
We purchased a North 3Di mainsail in 2017. After 10000 miles including an upwind transatlantic crossing it is still a perfect shape and is bulletproof. Absolutely worth the money... but that judgement depends on your budget and expectations!